Anats S.A. Logo

SYRINGE ICOPLUS 5CC/22G NOVICO

Syringe Icoplus 5cc with 22G needle
Manufacturer: Icoplus
SKU: 157-11-522

Syringe Icoplus 5cc with 22G needle

Syringe Icoplus 5cc with 22G needle

The syringes, "ICO", of the Italian plant NOVICO S.p.A. are of the type B, with a rubber seal to achieve leakage during movement of the piston within the cylinder and according to the provisions of Government Gazette 681 / Second Edition 8-8-91. The materials used to manufacture the ICO plastic syringes are Polypropylene for the cylinder, polyethylene for the plunger and for the Latex free natural rubber gasket with silicone of special specifications. Sterilization of syringes and needles is done with GAMMA RAY Radiation (Co 60-25 kGy). This sterilization method is now safe and safe for similar pharmaceuticals. The sterility and needle sterilization period is 5 years. After the production date, the material's expiration date is five (5) years.

Each syringe consists of 3 parts

1. The numbered cylinder, which is of high transparency that allows the labeling of bubbles or sediment in the liquid to be injected. The scale has clear, legible and uniform thicknesses, so as not to interfere with the measurement of the volume of the injectable fluid. Numerals are written on the long strokes and also have special fins for firm grip. At one end of the cylinder there is a special stop so that the plunger encounters sufficient resistance before it completely leaves it and the other end has a luer connection.

2. The piston has a fingertip for easy movement. The rubber seal has a double ring to ensure complete sealing and a fine silicone coating to easily move the piston into the cylinder. The gasket provides perfect tightness with the minimum volume possible.

3. The needle, which is made of 18/8 stainless steel, has been ultrasonic cleaned from foreign materials inside it, and the tip has been trimmed three times to avoid pain when penetrated into the skin. It has also been subjected to the extraction test during its production process. - The needle has a built-in protective cover for its safe disposal. - The needle has special fins and its cover is easily removed. - The needle tube is cut with a computer in the shape of a lumen. This allows for its soft influx fluid, and easy aspiration from the drug ampoule - The needle body is Silicone coated - Its membrane is also silicone and has steel mesh so it does not release (slip or loosen) even after friction or penetration pressure in the medicine ampoules. The packaging is individual, clean, sterile, safe, and does not allow the entry of micro-organisms. It is made of medical paper and transparent plastic film, it is not torn and opened easily. The syringe is delivered fully assembled with the needle already attached and packed into a blister-peel open envelope for complete leakproofness and sterility until use and bears all the necessary indications as follows.

1. Product description.

2. Commercial name.

3. CE marking 0051.

4. Syringe size and needle size.

5. Non-toxic.

6. For use.

7. Do not use again if the package is opened.

8. Non-pyrogenic.

9. Sterile.
10. Destruction after use.
11. Sterilization method.
12. Instructions for use.
13. Lot number.
14. Production date.
15. Date of sterilization and expiry date.
16. Production plant (full data) and country of production.
17. Latex Free
The production technology is in accordance with ISO9001, UNI CEI EN ISO 13485 DIRECTIVE 93/42 / EEC (the CEE Medical Device Directive). No CE mark is 0051.