HOT WATER BOTTLE CORONATION 2000CC BOTH SIDE RIBBED

Hot water bottle CORONATION 2LT both side ribbed in different colours (Red-Blue Green). Dimensions: 28x20cm
Manufacturer: Coronation
SKU: 015-16-001

Hot water bottle CORONATION 2LT both side ribbed

Dimensions: 28x20cm

Chemical Composition Rubber with additives
Composition Natural Rubber, Carbonate Filler, Titanium Dioxide, Zinc Oxide, Stearic acid, Sulfur, Pigments, Accelerators, Antioxidant, Plasticizer.

Hazards Identification Natural Rubber may cause allergy.
Leakage of bottle may cause burns.
Combustion of product may lead to emission of toxic materials.
Rarely, abnormal deterioration under extreme oxidizing conditions may cause leakages leading to burns.

First Aid Measures

Eyes and Skin: In case of allergic reaction, get immediate medical aid
In case of burn, cool affected area and get immediate medical aid

Ingestion: Get immediate medical aid
Inhalation: Not Applicable
Precautions: Combustion will lead to formation of Sulfur Dioxide and
Carbon Monoxide in combination with other toxic materials.
Breathing apparatus should be worn.

Handling: Normal handling required.
Do not handle using sharp objects to avoid punctures in product which may result in leakage.

Storage: Store bottle empty and upside down to dry.
Store bottle with stopper removed
Store bottle and all components in a cool, dark place, away from direct sunlight, hot surfaces & ignition sources
Keep away from moisture, hydrocarbon based solvents / oils / acids / alkalis

Skin Protection: No protective measures required under normal use
Avoid excessively prolonged direct contact with skin.
Wrap the bottle in a towel or covering.
Do not use bottle on skin wounds and rashes.
Bottle filling/opening should be carefully done to avoid splashing of water.
Hand Protection: No protective measures necessary under normal conditions.
In case of high temperature of product heat resistant gloves should be worn.
Bottle filling/opening should be carefully done to avoid splashing of water.
Eye Protection: No protective measures required under normal use
Bottle filling/opening should be carefully done to avoid splashing of water into eyes.
Other Protective Measures: In case of combustion of product, Breathing Apparatus should be worn.

Conditions to avoid: Do not apply excessive compression pressure on filled bottle
Do not directly heat or microwave product.
Materials to avoid: Do not use any other heating media except hot water in bottle
Do not bring hydrocarbon solvents / oils in contact with the product
Allergy Information: Product is made of Natural Rubber and may cause allergies
to skin sensitive to Natural Rubber.

Acute effects: May be harmful if swallowed
Chronic effects: Generally non-hazardous product under normal use

Mobility/Accumulation/Ecotoxicity: Not Applicable or Unknown
Degradability: Non-biodegradable

Disposal guidelines
Observe all federal, state and local environmental regulations for proper disposal.
Polybags should be disposed appropriately and kept away from children and infants.
Polybags are made of recyclable plastic

Usage Directions:

1. Do not use boiling water
2. Expel air by lowering on flat surface before fixing stopper
3. Screw stopper sufficiently tight so that there is no leakage
4. Check the stopper for wear/damages at regular intervals.
5. Do not fill hot water bottle directly from tap.
6. Do not fill more than two-thirds of the volume of the bottle.


Warnings/Caution Statements:

1 Do Not Use Boiling Water
2. Hot Water Bottle can cause burns. Avoid prolonged direct contact with body.
3. Do not place anything on top of the bottle.
4. Never use hot water bottle as a cushion to be sat on.
5. Store in a cool and dark place with stopper removed.
6. Do not Microwave.
7. Do not fill hot water directly from tap.
8. This Hot Water Bottle is made of Natural Rubber.
9. Polybags, if accompanying the product, should be disposed appropriately and kept away from children/infants.