Anats S.A. Logo

SYRINGE RAYS ΙNJ.LIGHT ΤUΒΕRCULIN 1ML 25G

Syringe Rays Ιnj.Light Tuberculin 1Ml 25G Sterile, Disposable. Non-Toxi And Non Pyrogenic, Transparent Polypropylene. Individual Blister Pack.Rays Italy Needle Of Aisi 304 Stainless Stell With Triple Bevelling,
Manufacturer: Rays
SKU: 257-11-125

Syringe  Rays Ιnj.Light  Tuberculin 1Ml 25G

Non- toxic and non-pyrogenic syringe composed of: medical transparent polypropylene cylinder with black graduation available with luer lock cone, centric or eccentric luer lock cone, catheter cone, medical polyethylene plunger,
latex free piston, stainless steel needle with triple bevelling, medical polypropylene needle cap.

Product name:Tuberculin 1Ml 25G

Code :TUB1ML26G13
Tuberculin syringes 1 ml with needle 26G length 19 mm
Packaging: 100pcs per box, 800pcs per carton

Use: Disposable Syringe with CENTRIC or ECCENTRIC LUER CONE, with mounted
needle. Infusions (Short-term, surgical and invasive device)

Needle: of AISI 304 stainless steel with triple bevelling with luer cone with international coloured hub according to the Gauge compliant ISO 594-1, lubricated with silicone oil in quantities ≤ 0.25 mg.
Sterilization method: Ethylene oxide Sterilization (EtO)
Gas residual: ≤ 10 ppm
Validity sterilization: 5 years from manufacturing date
Latex free: the syringe is completely latex-free, thus eliminating any risk of allergic reactions to latex
Packaging : Individual blister pack composed of medical paper and PP film that guarantees maximum security with regard to sterilization and prevents the formation of scraps of paper during the open operation. On the package: the sterilization date, expiry date and the batch numbers that are also reported outside the box which also shows the syringes quantity.
Barcode: EAN 13 barcode is printed on single blister packaging

Use and Instructions: Non pyrogenic, sterile syringe in polypropylene. For administration of injections. Non-toxic. Single use. Verify the integrity of the package before use. Do not use if package is damaged. Before use, check expiry date, open the packaging and use immediately. Before using the syringe, press the needle cap by rotating slightly then remove the same. Avoid touching the needle. After use put the needle cap back on and throw away. Dispose of properly.

Disposal: Disposal has to be conducted according to National regulations.
The incineration or disposal should be carried out under controlled conditions. The product has not been in contact with infectious agents or other hazardous materials produces no toxic residue.
Storage: Keep in dry and cool place, away from direct sunlight or heat sources, at temperatures below 50°C.
Conformity: Conform to standard ISO 7886-1 -1993 for chemical and biological properties of syringe; conform to standard ISO 7864-1993 for chemical and biological properties of needle; conform to standard ISO 594-1 for properties of luer cone; conform to EEC Directive 43/92 on medical devices.
Category: Medical device, class IIa in conformity with the EEC Directive 43/92 and following amendments.

Manufacturer: Rays S.r.l.